An IDS can only detect an attack. It cannot prevent attacks. In contrast, an IPS prevents attacks by detecting them and stopping them before they reach the target.
An attack is an attempt to compromise confidentiality, integrity, or availability.
The two primary methods of detection are signature-based and anomaly-based. Any type of IDS (HIDS or NIDS) can detect attacks based on signatures, anomalies, or both.
The HIDS monitors the network traffic reaching its NIC, and the NIDS monitors the traffic on the network.
Host Based intrusion detection system (HIDS)
A host-based intrusion detection system (HIDS) is additional software installed on a system such as a workstation or a server.
It provides protection to the individual host and can detect potential attacks and protect critical operating system files. The primary goal of any IDS is to monitor traffic.
The role of a host Intrusion Detection System is passive, only gathering, identifying, logging, and alerting. Examples of HIDS:
- OSSEC – Open Source Host-based Intrusion Detection System
- AIDE – Advanced Intrusion Detection Environment
- Prelude Hybrid IDS
The primary goal of any IDS is to monitor traffic. For a HIDS, this traffic passes through the network interface card (NIC). Many host-based IDSs have expanded to monitor application activity on the system.
As one example, you can install a HIDS on different Internet-facing servers, such as web servers, mail servers, and database servers. In addition to monitoring the network traffic reaching the servers, the HIDS can also monitor the server applications.
It’s worth stressing that a HIDS can help detect malicious software (malware) that traditional anti-virus software might miss.
Because of this, many organizations install a HIDS on every workstation as an extra layer of protection, in addition to traditional anti-virus software. Just as the HIDS on a server is used primarily to monitor network traffic, a workstation HIDS is mainly used to monitor network traffic reaching the workstation. However, a HIDS can also monitor some applications and can protect local resources such as operating system files. In other organizations, administrators only install a HIDS when there’s a perceived need.
For example, if an administrator is concerned that a specific server with proprietary data is at increased risk of an attack, the administrator might choose to install a HIDS on this system as an extra layer of protection.
Each uncompleted session consumes resources on the server, and if the SYN flood attack continues, it can crash the server.
Some servers reserve a certain number of resources for connections, and once the attack consumes these resources, the system blocks additional connections. Instead of crashing the server, the attack prevents legitimate users from connecting to the server.
IDSs and IPSs can detect an SYN flood attack and respond to block the attack. Additionally, many firewalls include a flood guard that can detect SYN flood attacks and take steps to close the open sessions.
Network-Based Intrusion Detection System (NIDS)
A network-based intrusion detection system (NIDS) monitors activity on the network. An administrator installs NIDSs sensors on network devices such as routers and firewalls.
These sensors gather information and report to a central monitoring server hosting a NIDS console.A NIDS is not able to detect anomalies on individual systems or workstations unless the anomaly causes a significant difference in network traffic.
Additionally, a NIDS is unable to decrypt encrypted traffic. In other words, it can only monitor and assess threats on the network from traffic sent in plaintext or nonencrypted traffic.
Important tools for NIDS
Examples of Network IDS:
The decision on where you want to place the sensors depends on what you want to measure. For example, the sensor on the Internet side of the firewall will see all the traffic.
However, the sensor on the internal side of the firewall will only see traffic that passes through the firewall. In other words, the firewall will filter some attacks, and the internal sensor won’t see them.
If you want to see all attacks on your network, put a sensor on the Internet side. If you only want to see what gets through, put sensors internally only. If you want to see both, put sensors in both places.
Signature-based IDSs (also called definition-based) use a database of known vulnerabilities or known attack patterns. For example, tools are available for an attacker to launch a SYN flood attack on a server by simply entering the IP address of the system to attack.
The attack tool then floods the target system with synchronize (SYN) packets, but never completes the three-way Transmission Control Protocol (TCP) handshake with the final acknowledge (ACK) packet. If the attack isn’t blocked, it can consume resources on a system and ultimately cause it to crash.
If the attack isn’t blocked, it can consume resources on a system and ultimately cause it to crash. However, this is a known attack with a specific pattern of successive SYN packets from one IP to another IP.
The Intrusion Detection System can detect these patterns when the signature database includes the attack definitions. The process is very similar to what antivirus software uses to detect malware. You need to update both Intrusion Detection System signatures and antivirus definitions from the vendor on a regular basis to protect against current threats.
Anomaly-based (also called heuristic-based or behavior-based) detection first identifies normal operation or normal behavior. It does this by creating a performance baseline under normal operating conditions.
The IDS provides continuous monitoring by constantly comparing current network behavior against the baseline. When the Intrusion Detection System detects abnormal activity (outside normal boundaries as identified the baseline), it gives an alert indicating a potential attack.
Anomaly-based detection is similar to how heuristic-based antivirus software works. Although the internal methods are different, both examine activity and make decisions that are outside the scope of a signature or definition database.
This can be effective at discovering zero-day exploits. A zero-day vulnerability is usually defined as one that is unknown to the vendor. However, in some usage, administrators define a zero-day exploit as one where the vendor has not released a patch.
In other words, the vendor may know about the vulnerability but has not written, tested, and released a patch to close the vulnerability yet. In both cases, the vulnerability exists and systems are unprotected. If attackers discover the vulnerabilities, they try to exploit them. However, the attack has the potential to create abnormal traffic allowing an anomaly-based system to detect it.
Any time administrators make any significant changes to a system or network that cause normal behavior to change, they should recreate the baseline. Otherwise, the IDS will constantly alert on what is now normal behavior.
Physical Intrusion Detection System
Physical intrusion detection is the act of identifying threats to physical systems. Physical intrusion detection is most often seen as physical controls put in place to ensure CIA. In many cases physical intrusion detection systems act as prevention systems as well. Examples of Physical intrusion detections are:
- Security Guards
- Security Cameras
- Access Control Systems (Card, Biometric)
- Man Traps
- Motion Sensors
A wireless local area network (WLAN) IDS is similar to NIDS in that it can analyze network traffic. However, it will also analyze wireless-specific traffic, including scanning for external users trying to connect to access points (AP), rogue APs, users outside the physical area of the company, and WLAN IDSs built into APs.
As networks increasingly support wireless technologies at various points of a topology, WLAN IDS will play larger roles in security. Many previous NIDS tools will include enhancements to support wireless traffic analysis. Some forms of IDPS are more mature than others because they have been in use much longer. Network-based IDPS and some forms of host-based IDPS have been commercially available for over ten years.
Network behavior analysis software is a somewhat newer form of IDPS that evolved in part from products created primarily to detect DDoS attacks, and in part from products developed to monitor traffic flows on internal networks.
Wireless technologies are a relatively new type of IDPS, developed in response to the popularity of wireless local area networks (WLAN) and the growing threats against WLANs and WLAN clients.
False Positives Vs False Negatives
IDSs are susceptible to both false positives and false negatives. A false positive is an alert or alarm on an event that is non-threatening, benign, or harmless.
A false negative is when an attacker is actively attacking the network, but the system does not detect it. Neither is desirable, but it’s impossible to eliminate both.
Most IDSs trigger an alert or alarm when an event exceeds a threshold. Consider the classic SYN flood attack, where the attacker withholds the third part of the TCP handshake. A host will send an SYN packet and a server will respond with an SYN/ACK packet.
However, instead of completing the handshake with an ACK packet, the attacking host never sends the ACK, but continues to send more SYN packets. This leaves the server with open connections that can ultimately disrupt services.
If a system receives one SYN packet without the accompanying ACK packet, is it an attack? Probably not. This can happen during normal operations.
If a system receives over 1,000 SYN packets from a single IP address in less than 60 seconds, without the accompanying ACK packet, is it an attack? Absolutely.
With this in mind, administrators set the threshold to a number between 1 and 1,000 to indicate an attack. If administrators set it too low, they will have too many false positives and a high workload as they spend their time chasing ghosts. If they set the threshold too high, actual attacks will get
If they set the threshold too high, actual attacks will get through without administrators knowing about them. Most administrators want to know if their system is under attack. That’s the primary purpose of the IDS.
However, an IDS that constantly cries “Wolf!” will be ignored when the real wolf attacks.
It’s important to set the threshold low enough to reduce the number of false positives, but high enough to alert on any actual attacks.There is no perfect number for the threshold. Administrators adjust thresholds in different
IDSs report on events of interest based on their settings. All events aren’t attacks or actual
issues, but instead, they provide a report indicating an event might be an alert or an alarm. Administrators investigate to determine if it is valid.
Some systems consider an alarm and an alert as the same thing. Other systems use an alert for a potentially serious issue, and an alarm as a relatively minor issue. The goal in these latter systems is to encourage administrators to give a higher precedence to alarms than alerts.
The actual reporting mechanism varies from system to system and in different organizations. For example, one IDS might write the event into a log as an alarm or alert, and then send an email to an administrator account.
In a large network operations center (NOC), the IDS might send an alert to a
monitor easily viewable by all personnel in the NOC.
Intrusion Detection System Responses
An IDS will respond after detecting an attack, and the response can be either passive or active.A passive response primarily consists of logging and notifying personnel, whereas an active response also changes the environment to block the attack:
Sensor Placement for a Network IDS
If you are deploying a network IDS, you should decide in advance where to place the monitoring sensors. This will depend significantly on what kind of intrusion or attempted intrusion you are trying to detect. Start by creating a detailed network diagram, if you don’t already have one.
A network Start by creating a detailed network diagram, if you don’t already have one. A network diagram can be invaluable to IDS planning. When looking at the diagram, evaluate key network choke points or collections of systems that are sensitive to business operations. A well prepared diagram may provide intrinsic clues to the right location for IDS sensors.
If the IDS is going to monitor a web server for penetrations, then the most useful position for the sensor will be on the DMZ segment with the web server. This assumes, of course, that your web server is in a DMZ segment, rather than outside or inside the firewall (neither of which is a particularly good idea).
If attackers compromise the server, the IDS has the best chance of detecting either the original penetration or the resulting activity originating from the compromised host.
Host integration for Host Intrusion Detection System
If you plan to use a host-based system, you should have an adequate testing and familiarization phase. This allows the operators and analysts to become familiar with the operation of that particular piece of software.
The IDS should be installed on a development system well in advance of planned installation on a production system. Even on a quiescent system, some files will change regularly (for example, the audit files), so the IDS will report some changes.
Some host-based systems, as an additional example, will report when a user process alters the system password file. This would happen if an intruder added an account.
It also happens, however, when a user changes his or her password. The IDS analyst needs time to become familiar with the correct operation of each system, so that he or she can properly diagnose deviations from “normal” alarms.
Be very cautious about using these features. In fact, for the first month or two, turn off all alarms.
Only look at the output from the system to see what it is detecting. All IDSs have, as discussed above, some level of false positives; that level can be as high as 80 or 90 percent of reported alarms. You need to be familiar with your particular system before you start turning on alarms.
Alarm misconfiguration, or over-aggressive response to alarms, can lead to an organizational decision to turn off the IDS. Richard Marcinko, a former US Navy SEAL, tells about throwing rabbits over fences into areas protected by motion sensors.
When the guard force got tired of responding to alarms (only to find rabbits munching on the lawn), Marcinko’s team was free to pass through that area, knowing the alarms would be ignored.
Hackers know that IDS installations are monitored by humans and that humans have human failings. They know that if they trigger alarm after alarm after alarm, the people monitoring the system will stop paying attention.
Likewise, if the IDS is configured to instruct the firewall to deny all traffic from “attacking” networks, the hackers can easily exploit this.
Install one sensor at a time. Don’t rush the installation in order to roll out the IDS capability in a short time span. It takes a certain amount of time for the administrators
It takes a certain amount of time for the administrators and analysts to gain familiarity with the peculiarities of a given system or network point, and the peculiarities may not be the same from point to point.
Preparing the system with Intrusion Detection System
Deciding on the placement of the Intrusion Detection System within the network is critical. The IDS machine must connect to a port that can see all traffic between the LAN and the Internet.
This means either connecting to a mirrored switch port or a hub located between the Internet connection and the LAN. If a firewall and only one IDS sensor is used, the sensor should be placed between the firewall and the LAN, for reasons that will be discussed later.
Choosing the type of machine to use is dependent on the environment and the data desired. A Snort IDS setup can involve one or several independent machines, or many that report to a central database server. The faster the connection being monitored and the level of logging dictate the machine capabilities.
For brevity, this article focuses on installing a single stand-alone IDS at the network edge. For a Linux install, a desktop computer that is several years old should suffice. Figure on a minimum of 256MB of RAM, a 20GB hard drive, a 600-MHz processor and a CD drive, all features of desktop machines made within the past few years.
For installing a base Linux operating system, a machine to create the installation CD is needed. A Windows box running Burn4Free (a freeware ISO burner) will work fine. In addition, the network parameters (IP address and such) and a network connection for the IDS machine should be determined prior to the Linux installation.
The needed applications
Snort essentially works on pattern matching by comparing packets to signatures of known attacks. There are literally thousands of such signatures available.
Think of Snort as an intelligent sniffer: It takes a continuous trace of inbound and outbound Internet traffic and analyzes the trace by comparing against the signature database in real time. To do this manually would be impossible.
If a packet matches a pattern in a selected signature, an alert is generated. Analyzing the alerts for meaningful data is no easy task, given the amount of data and its raw format presentation.
Therefore, a method is needed to collect and provide for group analysis of the data.
This example uses MySQL as the database application, but Microsoft SQL Server or Oracle may be used for the alert database as well. While populating a well-formatted database with Snort information is necessary for categorizing information, as with sniffer analysis, the process of analyzing such a database is labor-intensive.
This is where BASE comes into play. It’s a Web front end to the database that presents the Snort alert data. This provides the information a network or security administrator needs to identify threats and enact controls to reduce the threats.
Administering the Intrusion Detection System
After a successful installation, pointing a Web browser to the IDS will produce a summary alert window.
From here, intrusion-detection data may be analyzed efficiently. BASE offers many data aggregation and presentation tools.Each alert can be analyzed individually or as a group.
Building a functional IDS sensor is only the first step. Once installed, the IDS administrator should spend a significant amount of time exploring the alerts and capabilities of the system.
One doesn’t begin a major building project after setting up and operating a table saw for the first time, and such is the case with Snort/BASE.
As threats emerge, rules must be added to the system to match the signatures of those threats.
Snort offers a subscription service for access to emerging rules for a minimal fee or free access to the same rules to registered users for 30 days after they are released to the subscription service. Oinkmaster is an excellent tool for updating rules regularly.
In addition, signatures may be created manually, or pass options may be added to signatures that are determined to produce an abundance of false positives.
Determining if alerts are in fact normal network traffic or an actual threat is obviously necessary, as it would be foolish to disable a signature simply because it’s producing many alerts.
Snort can be deployed in a centrally managed distributed environment in which multiple sensors report back to a single database server. In large enterprise networks, this can be useful in correlating events as well as simply parsing information from multiple points on the network.